Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver

Price Save $69.00 from $1383 to $1314

Elevate your rifle build with the Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver to gain a competitive advantage during your multi-gun matches. These AR15 Upper Receivers developed by Daniel Defense include a Mil-Spec upper receiver, chrome moly vanadium steel barrel, rifle-length gas system, muzzle climb mitigator, M16 profile bolt carrier group, MFR 15in handguard and vertical grip. The upper receiver is CNC machined from 7075-T6 aluminum that's Type III hard coat anodized for reliable durability at no cost to weight. Plus, it's resistant to corrosion and wear over time. Land accurate shots down range with the chrome lined, heavy phosphate coated barrel that resists corrosive elements while remaining in prime condition even after experiencing friction. A 6061-T6 hard anodized aluminum handguard will give you a proper place to grip that's also impervious to harmful elements and tough as nails. Use the Picatinny rail with M-LOK attachment points on this Daniel Defense DDM4 V7 Pro Upper Receiver Kit to outfit your firearm with your favorite optics and accessories that will assist you in the field while going for gold. With this bundle, you get everything you need to enhance your upper to maximize your accuracy and performance in any scenario. Upgrade your weapon with the components included in this premium Daniel Defense DDM4 V7 Pro Upper Receiver Group.


RATING
92.5 /100
  • Design

    Excellent

  • Performance

    Excellent

  • Value for money

    Excellent

  • Feature

    Excellent

Specifications for Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver:

Caliber: 5.56x45mm NATO
Barrel Length: 18 in
Barrel Profile: S2W
Gas System: Rifle Length
Muzzle Device: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
Weight: 5.25 lb
Grip: Daniel Defense Vertical Grip, Glass-Filled Polymer, M-LOK

Features of Daniel Defense DDM4 V7 Pro Upper Receiver Group:

  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 18in S2W Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
  • GRIP: Daniel Defense Vertical Grip, Glass-Filled Polymer, M-LOK

1-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
2-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
3-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
4-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
5-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
6-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
7-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
8-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver
9-Daniel Defense DDM4 V7 Pro 18in 5.56 Upper Receiver

Enjoyed this article? Stay informed by joining our newsletter!

Comments
Jarrod - Add Reply

I wanted a high end upper to go with a newly finished high-quality lower. The DDM4 V7 Pro with its 18 inch barrel was everything I wanted plus more. The materials and components are top quality and are assembled very well. Features like a pinned gas block, top quality barrel material and pressure tested/mag particle inspected quality control are appreciated. When I received the upper, the build quality was obvious. It is solid and very well constructed with nothing loose or flimsy. Fit on my non Daniel Defense lower was really good. Balance is nice and while the barrel profile is fairly heavy, it still handles well. As described, the comp is small in size. Since the barrel is already fairly long, I didn't want a comp adding even more length so this was appreciated. About the only thing that surprised me was a plastic ejection port cover. Comments online (including those from Daniel Defense) state this was not done for cost reasons and that the cover is very durable and seals better. Time will tell about durability but it is definitely quieter when it pops open. Otherwise, I am extremely happy. No range time with it yet but that will come shortly.

You must be logged in to post a comment.

You must be logged in to post a comment.

Related Articles